Williams Sound TGS SYS A Uživatelská příručka stáhnout pdf (Strana 7)

Williams Sound

Helping People Hear

OPERATING INSTRUCTIONS

USING THE PPA T16 TRANSMITTER

Instructions:

Before you begin, make sure you have a 9V Alkaline disposable battery (BAT 006) installed in the transmitter.

See

Battery Information, page 12.

Mic

Williams Sound FM

Off

On/Off

Switch

Mic

Jack

Indicator

NOTE ON THE TRANSMITTER ANTENNA:

The microphone cord is the transmitting antenna. Do not bunch up the cord, wrap it tightly around

our bod

or wrap it aroun the transmitter. For maximum range, the cord should hang as straight as

possib

. The transmitter can be placed in a pants pocket, or clipped onto a belt or waistband. Make

sure the transmitter is turned OFF when not in use.

1. Install the battery in the Transmitter. A 9V alkaline disposable battery (BAT 006) is includ-

ed with the transmitter. If you are using a 9V rechargeable battery, see page 12. Open the

battery door on the Transmitter by lifting the battery door up. A coin may be used to help

open the battery door. Carefully insert the battery, observing proper polarity. The large bat-

tery terminal (-) is nearest the top of the compartment.

DO NOT FORCE THE BATTERY IN BACKWARDS. DAMAGE TO THE TRANSMIT-

TER WILL RESULT!

Close the battery door by snapping it shut. If you are using a disposable battery, use only

9V alkaline disposable batteries (BAT 006). A disposable battery should last 15 hours. A

BAT 003 re-chargeable battery will last about 3 hours per charge.

2. Plug the microphone into the "MIC/CHG" jack on top of the Transmitter. The Headset

Microphone boom should be positioned as close to the wearer's mouth as possible without

actually touching. Lapel Clip microphones should be attached to a collar or lapel, as close

to the wearer's mouth as possible.

3. The Transmitter can be placed in a pants pocket or clipped onto a belt or waistband in the

Belt Clip Case included with the Transmitter.

Note: The microphone cord is the transmitting antenna. Do not bunch it up or wrap it around the

transmitter. Allow it to hang as straight as possible.

4. Turn the Transmitter on by moving the slide switch on top of the Transmitter to "ON."

To conserve battery life, there is no indicator light. Make sure you turn the Transmitter off

when it is not in use to conserve the battery.

T16 TRANSMITTER TOP VIEW

1 2 3 4 5 6 7 8 9 10 11 12 ... 19 20

Komentáře k této Příručce

Žádné komentáře

Williams Sound TGS SYS A Uživatelská příručka Strana 7

Komentáře k této Příručce

Související produkty a manuály pro Systémy intercom pro domy Williams Sound TGS SYS A