Williams Sound WIR RX6 Instalační příručka stáhnout pdf (Strana 12)

Williams Sound

Helping People Hear

INSTALLATION STEP 4: MOD 112 MODULATOR SETUP

LOCATION

The Modulator is usually located with the sound system amplifier or mixer for easy access to

an audio input signal. For portable systems, the modulator can be placed near the emitter or

in another convenient location. (The SS-6 Stand Kit is available for portable systems.)

POWER

CONNECTION FOR U.S. APPLICATIONS:

Step 1: Connect the power supply to the 3-pin Molex connector located on the rear of the

MOD 112. (See Figure 8.)

OR APPLICATIONS

OUTSIDE THE U.S. REQUIRING 240 VAC MAINS SUPPLY:

Use the wall transformer power supply, model TFP 027.

Secondary Specifications: 24 VAC, 35 VA, 50/60 Hz.

Step 2: Plug the power supply into an AC outlet.

BASEBAND CABLE CONNECTION

The MOD 112 drives one emitter. The TX8 repeats the baseband signal, so any number of

emitters can be used. The modulator outputs CANNOT be split with CATV splitters.

UDIO CONNECTION

The MOD 112 accepts audio signals from industry-standard low impedance microphones,

balanced lines, and unbalanced lines.

MICROPHONE

An industry standard 3-pin male connector is used. Pin 1 is the shield and pins 2 and 3

are audio. Power for condenser microphones is supplied according to DIN 45596.

BALANCED LINE

A 1/4 inch Tip-Ring-Sleeve (3 conductor) phone plug is used. The three-pin connectors

are used for the mic input only.

UNBALANCED LINE

A 1/4 inch Tip-Sleeve (2 conductor) phone plug is used.

Model WIR MOD112 Two-Channel Infrared System Modulator

Accessory

Power: 24 VAC,

50-60 Hz, 10VA

Williams Sound Corp., Minneapolis, MN USA

Balanced

Mic (XLR)

Bal or Unbal

Line (1/4")

Ch 1 Audio Input Ch 2 Audio Input

Baseband

Output

Baseband

Input

50 Ohms 50 Ohms

Baseband Output Connection

Connect to TX8 here using

RG-58 cable and BNC connector.

Power Connection

Power Supply

120 VAC (US): TFP 010

230 VAC (CE): TFP 027

IGURE 8: MODULATOR WIRING DETAIL

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 23 24

Komentáře k této Příručce

Žádné komentáře

Williams Sound WIR RX6 Instalační příručka Strana 12

Komentáře k této Příručce

Související produkty a manuály pro Přijímač Williams Sound WIR RX6