Williams Sound DLT 100 2.0 Uživatelský manuál stáhnout pdf (Strana 6)

DLT 100 2.0 Digital Transceiver and DLR 60 2.0 Digital Receiver

Before Programming the Digi-Wave™ System

Prior to programming the system, decide what mode you will need, and what priority each DLT will have.

Any two people can talk in a group at any given time. The CM will have rst priority, CS has second priority and Slave units have

third priority. The CM or CS will have to turn o their talk access to allow the Slave units to talk. When two people are talking in a

group the participants can hear both voices in the DLT’s or DLR’s.

The CM and CS have the ability to lock out other talkers by holding down the TALK button for three seconds. All system TALK

LEDs will continuously ash while other participants are locked out of the TALK feature.

1. Decide which mode you need.

A. 2-Way Mode

In 2-way mode, DLTs can hear and talk to each other, just like having a phone conversation or a conference call. DLRs can listen

to the conversation. Common applications include: Tours with multiple Tour Guides, Tours with audience participation (Q&A),

Wireless Intercomm, Portable Discussion and Personal Communication.

Rules of Operation (2-way mode)

The following rules must be followed. Failure to adhere to these rules will result in unpredictable, unsupported operation.

2-Way

There must be one, and only one Chairman Master (CM) per group.

If the CM unit is o, the Chairman Slave and Slave units will turn o after a few minutes.

Chairman Slave is optional and there can only be one per group.

Each DLT 100 2.0 must have its own address and the address cannot be duplicated within a group.

Maximum two Talkers can operate simultaneously within a group.

Maximum four Groups can operate simultaneously within the same area, but each group must be assigned its own group number.

When using four simultaneous groups, group numbers must be sequential. i.e. 11, 12, 13, 14. Any numbers 0-1023 can be used.

Attendee count will only work with addresses 1-99 (Maximum 100 DLT 100 2.0’s with one Master at address 0).

With Secure Key Code active, all DLT 100 2.0’s within the group must have the same 4-digit code entered. (DLR 60s/DLR 50s will

not work with secured DLTs)

B. 1-WAY MODE(S)

In 1-way mode, DLTs listen to a speaker using a DLT, but they cannot communicate back to that speaker - instead they

communicate to DLRs. The most common applications are: Simultaneous Interpretation with one or more interpreters, or Tours

without audience participation (no Q&A).

There are (4) 1-way Modes:

1-way - Main Speaker

1-way - Interpreter

1-way - Repeater Mode

1-way - Receive or Listen Only (Not available on rmware version F-7)

Rules of Operation (1-WAY MODES)

The following rules must be followed when setting up any Digi-Wave™ system. Failure to adhere to these rules will result in

unpredictable, unsupported operation.

Up to 15 channels can be used simultaneously, i.e. one oor and 14 interpreters.

1 2 3 4 5 6 7 8 9 10 11 ... 31 32

Žádné komentáře

Williams Sound DLT 100 2.0 Uživatelský manuál Strana 6