Williams Sound SoundPlus Infrared System WIR SYS 90V Instalační příručka stáhnout pdf (Strana 25)

Williams Sound

Helping People Hear

TX9 FEATURES AND CONTROLS

POWER INPUT

Three-pin connector for TFP 010 (110 VAC) or TFP 027 (for 240 VAC installations) power supply.

OWER INDICATOR LED

Visible through the bottom panel (Fig. 25). Green indicator light glows when power is on.

Note: The TX9 shuts off when no baseband signal is present.

ASEBAND INDICATOR LED

Visible through the bottom panel (Fig. 25). Red indicator light glows when power is on.

ASEBAND IN

Connects to the Baseband Out jack of the MOD 232 modulator or another TX9 emitter.

ASEBAND OUT

Connects to the Baseband In jack of the next TX9 emitter in the chain when multiple emitters are

used. There are two Baseband Output jacks to allow additional emitters to be connected.

ALL/CEILING MOUNTING BRACKET

An adjustable mounting bracket (BKT 024) is included with the emitter. An optional tripod stand

kit is also available. See pages 17-19.

Note: The WIR TX9 Infrared Emitter is a Class 1 LED product.

Power On Baseband On

Multi-Channel Infrared Transmitter

Made in U.S.A.

24 VACNC

Class 1

LED Product

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

WARNING: TO REDUCE THE RISK OF FIRE OR

ELECTRIC SHOCK DO NOT EXPOSE THIS

EQUIPMENT TO RAIN OR MOISTURE.

Power In:

24VAC

50-60Hz

35VA

Power Supply Wiring:

Baseband Signal Wiring:

Note: It is normal for this unit to feel warm while it is in operation.

Plug

Use NEC, Class 2 Wiring, 18 ga. minimum,

200 ft. (70m) maximum length (18 ga.)

Use 50 Ohm Coaxial Cable (RG58)

Use RG58 Coax,1000 ft. (350m) max. length

Helping People Hear

Williams Sound Corp., Minneapolis, Minnesota, USA

Williams Sound

InOut Out

50 Ohms

Baseband

(Modulation)

Mounting

Bracket

Power Connection

Plug in Power Supply

120 VAC (US): TFP 010

230 VAC (CE): TFP 027

Wall/Ceiling

Mounting Bracket (BKT 024)

Set of threaded holes for

use with mounting bracket.

Baseband Out

BNC Connector, 50 Ω

50 kHz-8 MHz Baseband

Power On LED

Indicates transmitter is

on when lit.

(visible on bottom)

Baseband On LED

Indicates presence of

baseband signal.

(visible on bottom)

Baseband In

BNC Connector, 50 Ω

50 kHz-8 MHz Baseband

Figure 25: TX9 Emitter Rear View

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 35 36

Komentáře k této Příručce

Žádné komentáře

Williams Sound SoundPlus Infrared System WIR SYS 90V Instalační příručka Strana 25

Komentáře k této Příručce

Související produkty a manuály pro Přijímač Williams Sound SoundPlus Infrared System WIR SYS 90V